24 Most Wanted Boiler Flow Switches

10 Jan 2019

Warrick 3E4B Red Brass Liquid Level Sensor With Four Probe 2 1 2 NPT Male

Warrick 3E4B Red Brass Liquid Level Sensor With Four Probe 2 1 2 NPT Male
Warrick 3E4B Red Brass Liquid Level Sensor With Four Probe 2 1 2 NPT Male

Warrick 3E4B Red Brass Liquid Level Sensor With Four Probe 2 1 2 NPT Male. Die-cast aluminum, epoxy coated terminal housing. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. One-piece probe; red brass body construction. Compact designed for OEM. These Warrick fitting are designed for OEM use. 3 E Fittings require the use of 3 R rigid or 3 W wire suspended electrodes. It food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. Attachment to vessels is accomplished with external pipe threading. Series 3 E fittings are cast metal, pressure-tight assemblies capable of handling 4 probes. Terminal housing material: Die-cast aluminum, epoxy coated. Gems Warrick liquid level sensors are available in four probe models. Liquid level sensor with four probe. Pressure rating: 250 psig at 406 degree Conduit boss thread size: 1 / 2", NPT. Terminal housing measures 3-1 / 4", width by 2-3 / 8", height by 3-1 / 4", depth.

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Sensor SEN HW06C

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Sensor SEN HW06C
Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Sensor SEN HW06C

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Sensor SEN HW06C. Product Name: Water Flow Sensor; Model: SEN-HW 06 C; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. Water inlet and outlet of the gate with the arrow sign. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. Max Pressure: 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age One way 360 degree 6 mm outlet inlet outer diameter ports. Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Total Size: 55 x 40 x 23 mm / 2.2", x 1.6", x 0.91", (L W T), Outlet Inlet Outer Diameter: 6 mm; Cable Length: 32 cm / 12.6".

Honeywell BP900 Backflow Preventer With Atmospheric Vent

Honeywell BP900 Backflow Preventer With Atmospheric Vent
Honeywell BP900 Backflow Preventer With Atmospheric Vent

Honeywell BP900 Backflow Preventer With Atmospheric Vent. Designed for non-continuous backflow temperatures up to 250 F and working supply pressures up to 175 psi. Ideal for BOILER feed lines, livestock Drinking fountains, trailer park water hook-ups, laboratory equipment and numerous other applications. Suitable for hot or cold water service. It uses an intermediate vacuum breaker to protect against backflow and back siphon age of contaminated water into portable water supplies. Honeywell BP 900 backflow preventer is designed for continuous pressure applications on small supply lines.

Field Controls 46266301 CAS 3 Fan In A Can Combustion Air System For 110V Oil Systems Only

Field Controls 46266301 CAS 3 Fan In A Can Combustion Air System For 110V Oil Systems Only
Field Controls 46266301 CAS 3 Fan In A Can Combustion Air System For 110V Oil Systems Only

Field Controls 46266301 CAS 3 Fan In A Can Combustion Air System For 110V Oil Systems Only. Field Controls 46266301 CAS-3 Fan In A Can Combustion Air System For 110 V Oil Systems Only. If an optional Vacuum Relief Valve (VRV) is used, the incoming air is tempered before entering the structure's airspace. When air flow is established, the pressure switch closes. CAS-3 (Oil) This product is designed for use with any oil burning furnace, water heater, or boiler with 120 VAC control systems. How the CAS-3 and CAS-4 work When the thermostat calls for heat, the Fan-in-a-Can engages and begins drawing air into the structure. The CAS unit mechanically draws air into a structure and disperses it near the combustion air intake of an appliance. The Fan-in-a-Can diffuses the outside air into the room near the burner to ensure adequate air for efficient combustion. It may also be used with more than one appliance. Field Controls 46266301 CAS-3 Fan In A Can Combustion Air System For 110 V Oil Systems Only What's 1- Motorized Blower 1- 4", galvanized intake air Vent Hood 2- Mounting Brackets to secure the CAS to a wall 2- Wire / Conduit connectors 1- 4", x 6", Pipe Increaser Fitting 1- 6", Orifice Ring 1- Instruction Sheet 1- High / Low Motor Speed Switch CAS-3 (Oil) CAS-3 (Oil) This product is designed for use with any oil burning furnace, water heater, or boiler with 120 VAC control systems. Refer to Diagram A and B for guidance in setting up the CAS system based on the size and length of the connecting ductwork and the input rating of the appliance. What's 1- Motorized Blower 1- 4", galvanized intake air Vent Hood 2- Mounting Brackets to secure the CAS to a wall 2- Wire / Conduit connectors 1- 4", x 6", Pipe Increaser Fitting 1- 6", Orifice Ring 1- Instruction Sheet 1- High / Low Motor Speed Switch. Refer to Diagram A and B for guidance in setting up the CAS system based on the size and length of the connecting ductwork and the input rating of the appliance.

Uxcell A13082200ux0365 ZP10010 2 52 Water Liquid Level Sensor Plastic Dual Float Floating Switch

Uxcell A13082200ux0365 ZP10010 2 52 Water Liquid Level Sensor Plastic Dual Float Floating Switch
Uxcell A13082200ux0365 ZP10010 2 52 Water Liquid Level Sensor Plastic Dual Float Floating Switch

Uxcell A13082200ux0365 ZP10010 2 52 Water Liquid Level Sensor Plastic Dual Float Floating Switch. Product Name: Water Flow Sensor; Model: SEN-HW 06 W; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. 100% high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Uxcell a 13041800 ux 0065 Dual Ball Water Level Sensor Vertical Liquid Float Switch Fish Tank Pool, 26.5 cm. Inside Magnet Quantity: 4; Total Size: 63 x 41 x 23 mm / 2.5", x 1.65", x 0.91", (L W T), Inlet Outlet Thread Diameter: G 1 / 4", Cable Length: 32 cm / 12.6".

Aexit 0 15 1 5L Min One Anemometers Flowmeters Way 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Counter Sensor

Aexit 0 15 1 5L Min One Anemometers Flowmeters Way 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Counter Sensor
Aexit 0 15 1 5L Min One Anemometers Flowmeters Way 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Counter Sensor

Aexit 0 15 1 5L Min One Anemometers Flowmeters Way 6Mm Inlet Outlet Outside Dia Water Flow Flowmeters Counter Sensor. Product Name: Water Flow Sensor; Model: SEN-HW 06 K; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. Max Pressure: 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Water inlet and outlet of the gate with the arrow sign. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. and high quality Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age One way 360 degree 6 mm outlet inlet outer diameter ports. Total Size: 66 x 41 x 23 mm / 2.6", x 1.6", x 0.9", (L W T), Outlet Inlet Outer Diameter: 6 mm; Cable Length: 32 cm / 12.6".

Warrick 26MB1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 10K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26MB1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 10K Ohms Direct Sensitivity 120 VAC Voltage
Warrick 26MB1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 10K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26MB1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 10K Ohms Direct Sensitivity 120 VAC Voltage. 10 K ohms direct sensitivity. Modular plug-in design. Designed for low-water cutoff protection. Gems Series 26 M is designed for low-water cutoff protection. Low voltage sensor. This control meets CSD 1 requirements for boiler low water cutoff. Solid state reliability. Applicable for low-water cutoff, point level, alarms.

Warrick 26C2C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 26K Ohms Direct Sensitivity 240 VAC Voltage

Warrick 26C2C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 26K Ohms Direct Sensitivity 240 VAC Voltage
Warrick 26C2C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 26K Ohms Direct Sensitivity 240 VAC Voltage

Warrick 26C2C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 26K Ohms Direct Sensitivity 240 VAC Voltage. AC current minimizes electrolysis. Built-in 3 second time delay is standard. 26 K ohms direct sensitivity, 240 VAC voltage. LED monitoring; AC current minimizes electrolysis. Gems Warrick general purpose low water cutoff open circuit board control with screw mount standoff. Meets CSD 1 requirements. Designed for boiler low-water cutoff protection. Measures 2-3 / 16", width by 2-1 / 2", height.

Warrick 3B1B 316 Stainless Steel Two Piece Threaded Coupling With Single Electrode Probe 3 8 18 NPT Male

Warrick 3B1B 316 Stainless Steel Two Piece Threaded Coupling With Single Electrode Probe 3 8 18 NPT Male
Warrick 3B1B 316 Stainless Steel Two Piece Threaded Coupling With Single Electrode Probe 3 8 18 NPT Male

Warrick 3B1B 316 Stainless Steel Two Piece Threaded Coupling With Single Electrode Probe 3 8 18 NPT Male. Pressure rating: 400 psig at 406 degree U. 3 B fittings are compact pressure tight assemblies that hold a single electrode probe. Series 3 B fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. Compact designed for OEM. Two-piece threaded coupling. These Warrick fitting are designed for OEM use. Gems Warrick liquid level sensors are available in seven probe models. One-piece probe; 316 stainless steel body construction. Its Food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. Warrick 3 E 1 B Red Brass Liquid Level Sensor with Single Probe, 1", NPT Male. Gems Sensors 3 R 2 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 2 Length. Gems Sensors 3 R 3 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 3 Length. Warrick 3 B 3 B 316 Stainless Steel Two-Piece Threaded Coupling with Single Electrode Probe, 5 / 8", 24 UNEF. Gems Sensors 3 R 1 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 1 Length. These fittings incorporate a 1 / 4", 20 female thread that must be combined with a Series 3 R (rigid rod electrode) or Series 3 W / 3 Y (wire suspended electrode) to make a complete assembly. These fittings incorporate a 1 / 4", 20 female thread.

Uxcell Stainless Steel One Ball Liquid Level Sensor Vertical Float Switch 13 5 Cm

Uxcell Stainless Steel One Ball Liquid Level Sensor Vertical Float Switch 13 5 Cm
Uxcell Stainless Steel One Ball Liquid Level Sensor Vertical Float Switch 13 5 Cm

Uxcell Stainless Steel One Ball Liquid Level Sensor Vertical Float Switch 13 5 Cm. 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. 100% high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. Product Name: Water Flow Sensor; Model: SEN-HW 06 W; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. Inside Magnet Quantity: 2; Total Size: 54 x 41 x 23 mm / 2.1", x 1.65", x 0.91", (L W T), Inlet Outlet Thread Diameter: G 1 / 4", Cable Length: 32 cm / 12.6".

Honeywell SV9510K2539 Upgraded Replacement For Furnace Smart Gas Valve

Honeywell SV9510K2539 Upgraded Replacement For Furnace Smart Gas Valve
Honeywell SV9510K2539 Upgraded Replacement For Furnace Smart Gas Valve

Honeywell SV9510K2539 Upgraded Replacement For Furnace Smart Gas Valve. Diagnostic LED indicates system status. This system is suitable for a wide range of fan-assisted combustion, gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances. The control also monitors the appliance airflow proving switch circuit and limit string to assure proper appliance operation. The ignition source is 120 V hot surface igniter lighting the main burner flame. It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications. The Smart Valve System Controls provide prep urge, post purge and timed trial for ignition with multiple ignition trials and auto reset from lockout. 17 sec HSI Warm-Up. Direct Hot Surface Ignition Smart Valve Control. The control communicates directly with the ST 9160 Electronic Fan Timer (EFT) in typical forced warm air furnace applications. When controlled directly by a thermostat, the control does not provide a post purge function, as power to the control is removed when the thermostat call for heat ends. The Smart Valve System Controls combine gas flow control and electronic direct main burner ignition sequencing functions into a single unit. Provides all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vic combustion air blower.

Uxcell Tank Pool Liquid Water Level Sensor 19 Mm X 16 5 Mm Horizontal Float Switch

Uxcell Tank Pool Liquid Water Level Sensor 19 Mm X 16 5 Mm Horizontal Float Switch
Uxcell Tank Pool Liquid Water Level Sensor 19 Mm X 16 5 Mm Horizontal Float Switch

Uxcell Tank Pool Liquid Water Level Sensor 19 Mm X 16 5 Mm Horizontal Float Switch. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. Product Name: Water Flow Sensor; Model: SEN-HZ 06 C; Flow Range: 0.3-4.0 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. 100% high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Inside Magnet Quantity: 2; Total Size: 66 x 42 x 23 mm / 2.6", x 1.7", x 0.91", (L W T), Outlet Inlet Outer Diameter: 6 mm; Cable Length: 32 cm / 12.6".

Uxcell ZP2508 Water Tank Liquid Level Sensor Mini Floating Switches 5 Pieces

Uxcell ZP2508 Water Tank Liquid Level Sensor Mini Floating Switches 5 Pieces
Uxcell ZP2508 Water Tank Liquid Level Sensor Mini Floating Switches 5 Pieces

Uxcell ZP2508 Water Tank Liquid Level Sensor Mini Floating Switches 5 Pieces. Product name: water flow sensor; model: sen-hz 06 fa; flow range: 0.2-2.5 L / min; working Voltage current: DC 4.5 V-18 v, 10 m A. strong impact and chemical erosion; forbid to throw or collision; install vertically, angle of inclination should not be exceeded 5 degree medium temperature should not be exceeded. Max pressure: 0.8 MPa; insulation performance.), 100 M Ohm; Connector Type: 3 Pinjst Connector; main material: POM. 100 percent high quality and high precision portable size and light weight, easy to install with stainless steel ball inside of the impeller, wear-proof up and down structure stress applied for the seal ring, to leak imported Hall element, adopt pouring sealant encapsulation to to leak and mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, Campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Rated Voltage: DC 5 V; pulse duty Factor: 50 percent high level of pulse output: 4.5 V; low level of pulse output: 0.5 V. Inside magnet quantity: 4; total Size: 63 x 40 x 23 mm / 2.5", x 1.6", x 0.91", (L w t), thread diameter: G 1 / 4; outlet outside diameter: 6 mm. Cable Length: 32 cm / 12.6 inch.

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min G1 4 Thread Hall Effect Water Flow Flowmeters Sensor SEN HW06W

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min G1 4 Thread Hall Effect Water Flow Flowmeters Sensor SEN HW06W
Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min G1 4 Thread Hall Effect Water Flow Flowmeters Sensor SEN HW06W

Aexit High Precision Anemometers Flowmeters 0 15 1 5L Min G1 4 Thread Hall Effect Water Flow Flowmeters Sensor SEN HW06W. Product Name: Water Flow Sensor; Model: SEN-HW 06 W; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. Max Pressure: 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Total Size: 55 x 40 x 23 mm / 2.2", x 1.6", x 0.91", (L W T), Thread Diameter: G 1 / 4; Cable Length: 32 cm / 12.6".

Brass Flow Switch W Flexible Paddles Double Switch Pack Of 2

Brass Flow Switch W Flexible Paddles Double Switch Pack Of 2
Brass Flow Switch W Flexible Paddles Double Switch Pack Of 2

Brass Flow Switch W Flexible Paddles Double Switch Pack Of 2. EPDM Seal Superior to Competitor's Mechanical Bellows. Little Mechanical Wear or Fatigue. Greater Flow Sensitivity and Wider Adjustment Range. Higher Pressures, 250 PSI Standard. It is used in a wide variety of applications including heating systems, domestic water boosters, process work, water systems, chillers and on low mass boilers. The Taco Industrial Flow Switch (IFS) starts or stops electronically operated equipment when a flow or no flow condition occurs. Features: 3 Year Warranty. The IFS can be used in 1", to 8", liquid flow lines, carrying water or any nonhazardous fluid not harmful to brass, stainless steel or EPDM. Features: 3 Year Warranty EPDM Seal Superior to Competitor's Mechanical Bellows Little Mechanical Wear or Fatigue Greater Flow Sensitivity and Wider Adjustment Range Higher Pressures, 250 PSI Standard 250 F Temperature Rating Stainless Steel Paddles Trip Rods NEMA 1 and NEMA 4 Models Single or Double Switch Models High Current Models Available For Use on 1", to 8", Diameter Pipe UL, CSA, CE Approved. The IFS can be used in 1", to 8", liquid flow lines, carrying water or any nonhazardous fluid not harmful to brass, stainless steel or EPDM.

Warrick 3E3B Red Brass Liquid Level Sensor With Three Probe 2 NPT Male

Warrick 3E3B Red Brass Liquid Level Sensor With Three Probe 2 NPT Male
Warrick 3E3B Red Brass Liquid Level Sensor With Three Probe 2 NPT Male

Warrick 3E3B Red Brass Liquid Level Sensor With Three Probe 2 NPT Male. Terminal housing material: Die-cast aluminum, epoxy coated. 3 E Fittings require the use of 3 R rigid or 3 W wire suspended electrodes. Attachment to vessels is accomplished with external pipe threading. Gems Warrick liquid level sensors are available in three probe models. One-piece probe; red brass body construction. Compact designed for OEM. It food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. Liquid level sensor with three probe. These Warrick fitting are designed for OEM use. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. Series 3 E fittings are cast metal, pressure-tight assemblies capable of handling 3 probes. Die-cast aluminum, epoxy coated terminal housing. Warrick 3 E 1 B Red Brass Liquid Level Sensor with Single Probe, 1", NPT Male. Gems Sensors 3 R 1 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 1 Length. Gems Sensors 3 R 2 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 2 Length. Warrick 16 MC 1 A 0 General Purpose Solid State Plug-In Module with 8 Pin Octal Socket, 26 K ohms Direct Sensitivity, 120 VAC Voltage. Pressure rating: 250 psig at 406 degree Conduit boss thread size: 1 / 2", NPT. Terminal housing measures 3-1 / 4", width by 2-3 / 8", height by 3-1 / 4", depth.

Warrick 3E4C 316 Stainless Steel Liquid Level Sensor With Four Probe 2 1 2 NPT Male

Warrick 3E4C 316 Stainless Steel Liquid Level Sensor With Four Probe 2 1 2 NPT Male
Warrick 3E4C 316 Stainless Steel Liquid Level Sensor With Four Probe 2 1 2 NPT Male

Warrick 3E4C 316 Stainless Steel Liquid Level Sensor With Four Probe 2 1 2 NPT Male. Attachment to vessels is accomplished with external pipe threading. Compact designed for OEM. Liquid level sensor with four probe. Die-cast aluminum, epoxy coated terminal housing. 3 E Fittings require the use of 3 R rigid or 3 W wire suspended electrodes. Series 3 E fittings are cast metal, pressure-tight assemblies capable of handling 4 probes. Terminal housing material: Die-cast aluminum, epoxy coated. Gems Warrick liquid level sensors are available in four probe models. One-piece probe; 316 stainless steel body construction. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Pressure rating: 250 psig at 406 degree Conduit boss thread size: 1 / 2", NPT. Terminal housing measures 3-1 / 4", width by 2-3 / 8", height by 3-1 / 4", depth.

Warrick 26B1C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 10K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26B1C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 10K Ohms Direct Sensitivity 120 VAC Voltage
Warrick 26B1C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 10K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26B1C0 General Purpose Low Water Cutoff Open Circuit Board Control With Screw Mount Standoff 10K Ohms Direct Sensitivity 120 VAC Voltage. Designed for boiler low-water cutoff protection. 353, L.508 file MP 1430 approvals. 10 K ohms direct sensitivity, 120 VAC voltage. Built-in 3 second time delay is standard. Meets CSD 1 requirements. LED monitoring; AC current minimizes electrolysis. AC current minimizes electrolysis. Gems Warrick general purpose low water cutoff open circuit board control with screw mount standoff. Measures 2-3 / 16", width by 2-1 / 2", height.

Warrick 3E2A Cast Iron Liquid Level Sensor With Two Probe 2 NPT Male

Warrick 3E2A Cast Iron Liquid Level Sensor With Two Probe 2 NPT Male
Warrick 3E2A Cast Iron Liquid Level Sensor With Two Probe 2 NPT Male

Warrick 3E2A Cast Iron Liquid Level Sensor With Two Probe 2 NPT Male. 3 E Fittings require the use of 3 R rigid or 3 W wire suspended electrodes. Liquid level sensor with two probe. One-piece probe; cast iron body construction. It food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Die-cast aluminum, epoxy coated terminal housing. Series 3 E fittings are cast metal, pressure-tight assemblies capable of handling 2 probes. Compact designed for OEM. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. Terminal housing material: Die-cast aluminum, epoxy coated. Gems Warrick liquid level sensors are available in two probe models. Attachment to vessels is accomplished with external pipe threading. Gems Sensors 3 R 1 C 0 316 Stainless Steel General Purpose Probe, 1 / 4", NPT Male, 1 Length. Pressure rating: 125 psig at 353 degree Conduit boss thread size: 1 / 2", NPT. Terminal housing measures 3-1 / 4", width by 2-3 / 8", height by 3-1 / 4", depth.

Warrick 26MC1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 26K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26MC1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 26K Ohms Direct Sensitivity 120 VAC Voltage
Warrick 26MC1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 26K Ohms Direct Sensitivity 120 VAC Voltage

Warrick 26MC1A0 General Purpose Low Water Cutoff Plug In Module With 11 Pin Octal Socket 26K Ohms Direct Sensitivity 120 VAC Voltage. 26 K ohms direct sensitivity. Modular plug-in design. Designed for low-water cutoff protection. Solid state reliability. This control meets CSD 1 requirements for boiler low water cutoff. Low voltage sensor. Applicable for low-water cutoff, point level, alarms. Gems Series 26 M is designed for low-water cutoff protection.

Uxcell 8Mm Hall Effect Liquid Water Flow Sensor Switch Flowmeter Meter 1 2 12L Min SEN CL08C

Uxcell 8Mm Hall Effect Liquid Water Flow Sensor Switch Flowmeter Meter 1 2 12L Min SEN CL08C
Uxcell 8Mm Hall Effect Liquid Water Flow Sensor Switch Flowmeter Meter 1 2 12L Min SEN CL08C

Uxcell 8Mm Hall Effect Liquid Water Flow Sensor Switch Flowmeter Meter 1 2 12L Min SEN CL08C. Brass material, small size, easy to install. The water flow sensor is applied for water heater, and can be used as flow switch. Stable, high temperature, low water pressure start. Water Flow Switch adopts a Magnetic Reed Switch and a movable magnet which is fixed inside the water pipe. for 8 mm inner diameter hose. When water flows in the pipe, the magnet will detect the water flow and make the reed switch close or open. All materials are in line with SGS testing standards. Flow Range: 1.2-12 L / min; Maximum Water Pressure: 1.75 Mpa. Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card self-help water systems, water treatment equipment, cooling systems, mechanical equipment, Name: Water Flow Sensor Material: Brass (Shell) Liquid Temperature: Not More Than 60 CFlow Range: 1.2-12 L / min Connector Size: 8 mm Max Switch Voltage: DC 250 VMax Rating: 70 WMax Current: 10 m AMaximum Water Pressure: 1.75 MPa Cable Length: 33 cm Size: 81 mm x 21 mm x 26 mm (L W H) Ingress Protection Rating: IP 65 Color: Brass Tone Net Weight: 115 g 1 x Water Flow Sensor Installed in accordance with flow direction in the of product, otherwise there is no signal output.

Aexit Plastic 0 15 1 5L Min Anemometers Flowmeters G1 4 Male Thread Water Flow Sensor Flowmeters Flowmeter SEN HZ06W

Aexit Plastic 0 15 1 5L Min Anemometers Flowmeters G1 4 Male Thread Water Flow Sensor Flowmeters Flowmeter SEN HZ06W
Aexit Plastic 0 15 1 5L Min Anemometers Flowmeters G1 4 Male Thread Water Flow Sensor Flowmeters Flowmeter SEN HZ06W

Aexit Plastic 0 15 1 5L Min Anemometers Flowmeters G1 4 Male Thread Water Flow Sensor Flowmeters Flowmeter SEN HZ06W. strong impact and chemical erosion; Forbid to throw or collision; Install vertically, angle of inclination should not be exceeded 5 degree Medium temperature should not be exceeded. Rated Voltage: DC 5 V; Pulse Duty Factor: 50 % High Level of Pulse Output: 4.5 V; Low Level of Pulse Output: 0.5 V. Max Pressure: 0.8 Mpa; Insulation Performance (Min.), 100 M ohm; Connector Type: 3 Pin JST Connector; Main Material: POM. Product Name: Water Flow Sensor; Model: SEN-HZ 06 W; Flow Range: 0.15-1.5 L / min; Working Voltage Current: DC 4.5 V-18 V, 10 m A. high quality and high Precision Portable size and light weight, easy to install With stainless steel ball inside of the impeller, wear-proof Up and down structure stress applied for the seal ring, to leak Imported Hall element, adopt pouring sealant encapsulation to to leak and age Mainly used for water heater, boiler, water dispensers, coffee machines, steam equipment, campus card of water system, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical (system economy) equipment, etc. Inside Magnet Quantity: 2; Total Size: 81 x 41 x 23 mm / 3.2", x 1.65", x 0.91", (L W T), Inlet Outlet Thread Diameter: G 1 / 4", Cable Length: 32 cm / 12.6".

Brass G3 4 26Mm Lalaki Thread Reed Tubig Daloy Lumipat Flowmeter 1 30L Min

Brass G3 4 26Mm Lalaki Thread Reed Tubig Daloy Lumipat Flowmeter 1 30L Min
Brass G3 4 26Mm Lalaki Thread Reed Tubig Daloy Lumipat Flowmeter 1 30L Min

Brass G3 4 26Mm Lalaki Thread Reed Tubig Daloy Lumipat Flowmeter 1 30L Min. Lalaki Thread Dia (Ang bawat End), G 3 / 4; Working Range: 1-30 L / min; Max. Pangalan ng Produkto: Tubig Daloy ng Switch; Modelo: SEN-ZL 43 W; Uri: Gravity Uri. Pressure: 1.75 Mpa. Mainly ginagamit para pampainit ng tubig, boiler, tubig dispensers, coffee machine, mainit na card machine, steam kagamitan, water system, ang campus card benta, nagbebenta ng tulong sa sarili sistema ng tubig, tubig paggamot kagamitan, paglamig system, makina kagamitan, mga kasangkapan, pharmaceutical kagamitan. Max Lumipat Boltahe: DC 250 V; Max Makipag-ugnay Rating: 70 W; Max Lumipat Kasalukuyan: 10 m A. Tubig Daloy Lumipat adopts isang Gravity Reed Lumipat, G 3 / 4 na lalaki may sinulid ports bawat dulo, vertical installation. Kabuuang Sukat: 62 x 27 mm / 2.4 x 1.1 (L W), Cable Length: 33 cm / 13; Main Material: Brass.

Aexit Brass G3 4 Anemometers Flowmeters 26Mm Male Thread Reed Water Flow Switch Flowmeters Flowmeter 1 30L Min

Aexit Brass G3 4 Anemometers Flowmeters 26Mm Male Thread Reed Water Flow Switch Flowmeters Flowmeter 1 30L Min
Aexit Brass G3 4 Anemometers Flowmeters 26Mm Male Thread Reed Water Flow Switch Flowmeters Flowmeter 1 30L Min

Aexit Brass G3 4 Anemometers Flowmeters 26Mm Male Thread Reed Water Flow Switch Flowmeters Flowmeter 1 30L Min. Product Name: Water Flow Switch; Model: SEN-ZL 43 W; Type: Gravity Type. Pressure: 1.75 Mpa. Water Flow Switch adopts a Gravity Reed Switch, G 3 / 4 male threaded ports each end, vertical installation. Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment. Male Thread Dia (Each End), G 3 / 4; Working Range: 1-30 L / min; Max. Total Size: 62 x 27 mm / 2.4", x 1.1", (L W), Cable Length: 33 cm / 13", Main Material: Brass.