19 Top Compression Fitting Tube Inserts

7 Jul 2017

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 1 8 X 1 8 Tube OD

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 1 8 X 1 8 Tube OD
Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 1 8 X 1 8 Tube OD

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 1 8 X 1 8 Tube OD. Standard fittings use short nuts. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the USA and its territories. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Three piece construction - nut, sleeve and body with attached insert. 65 Degree F to 250 degree F temperature range. Use with copper, brass, aluminum, or plastic tubing. 1 / 8", Tube outer diameter. 5 / 16", 24 Thread size.

Anderson Metals 50070 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 2 NPT Female Pipe

Anderson Metals 50070 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 2 NPT Female Pipe
Anderson Metals 50070 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 2 NPT Female Pipe

Anderson Metals 50070 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 2 NPT Female Pipe. Primary uses water, gasoline, oil and vacuum lines. 65 degree F to 250 degree F temperature range. Use with copper, brass, aluminum, or plastic tubing. Three piece construction - nut, sleeve and body with attached insert. Three piece construction nut, sleeve and body with attached insert. Standard fittings use short nuts. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the USA and its territories. Easy to disassemble no flaring tool required. Thread size: 11 / 16", 20.

Dixon 1 4 Tube Size Brass Seal Plug Compression Fitting 639C 04

Dixon 1 4 Tube Size Brass Seal Plug Compression Fitting 639C 04
Dixon 1 4 Tube Size Brass Seal Plug Compression Fitting 639C 04

Dixon 1 4 Tube Size Brass Seal Plug Compression Fitting 639C 04. Do not use in connection with drinking. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Pressure rating given at 73? FWeight (lb), 0.0305 Applications: Use with copper, aluminum and thermoplastic tubing. For thermoplastic tubing, see manufacturers recommendation for pressure range. Be sure the tube is bottomed on the fitting shoulder. Insert tube into the fitting. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not Underwriter's Laboratories listed for flammable liquid; SAE J-512; ASAInstallation: no flaring, or other preparation of tubing necessary to assemble; Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Supplier: Dixon Material: Brass Thread: Straight Thread Size: 7 / 16", 24 Tube Size: 1 / 4", Hex: 7 / 16", Length: 74", Temperature Range: 65?

Parker 63PT 4 40 Compression Tube Insert Brass 1 4 OD X 040 Wall Tube

Parker 63PT 4 40 Compression Tube Insert Brass 1 4 OD X 040 Wall Tube
Parker 63PT 4 40 Compression Tube Insert Brass 1 4 OD X 040 Wall Tube

Parker 63PT 4 40 Compression Tube Insert Brass 1 4 OD X 040 Wall Tube. Item Compression Tube Insert Brand Parker Model 63 PT-4-40 Size 1 / 4 OD Tube 040 Wall Tube Type Compress-Align Material Brass Max Pressure 1400 PSI. The Compression line of Parker Brass Products is UL listed for use with flammable liquids. Brass compression fitting for use with copper, aluminum or thermoplastic tubing.

Maxline M8011 Equal Tee Fitting For 3 4 Inch Tubing

Maxline M8011 Equal Tee Fitting For 3 4 Inch Tubing
Maxline M8011 Equal Tee Fitting For 3 4 Inch Tubing

Maxline M8011 Equal Tee Fitting For 3 4 Inch Tubing. 175 psi maximum working pressure. Double O-ring compression style fitting, tubing can be removed from fitting if needed. Nickel plated brass fitting guards against corrosion. Maxline M 8201 Dual Port Outlet Kit with 3 / 4-Inch Tubing and 1 / 2-Inch NPT Outlet Port. Maxline M 8003 Straight Fitting for 3 / 4-Inch Tubing with 3 / 4-Inch Male NPT Thread. Rapidair K 93217 NPT Filter Regulator, 3 / 4-Inch. Maxline M 8065 Pipe Clip for 3 / 4-Inch Tubing, 10-Pack. Rapidair F 0215 Compressor Jumper Hose, 3 / 4 x 3-Feet. Maxline M 7510 Outlet Kit for 3 / 4-Inch Tubing with 1 / 2-Inch NPT Outlet Port. Maxline M 8005 Straight Fitting for 3 / 4-Inch Tubing with 1 / 2-Inch Male NPT Thread. Maxline M 8067 Elbow Fitting for 3 / 4-Inch Tubing. Maxline M 7500 Master Kit, 3 / 4-Inch x 100-Feet. Maxline M 8022 Union Fitting for 3 / 4-Inch Tubing. The Maxline 3 / 4-Inch tubing x 3 / 4-Inch tubing x 3 / 4-Inch tubing, Tee fitting, features a compression fitting style to make fast and easy connections. Simply cut the tubing to length, insert in the fitting and tighten. Use only with Maxline 3 / 4-Inch system.

Parker 63PT 8 62 Compression Tube Insert Brass 1 2 OD X 062 Wall Tube

Parker 63PT 8 62 Compression Tube Insert Brass 1 2 OD X 062 Wall Tube
Parker 63PT 8 62 Compression Tube Insert Brass 1 2 OD X 062 Wall Tube

Parker 63PT 8 62 Compression Tube Insert Brass 1 2 OD X 062 Wall Tube. Item Compression Tube Insert Brand Parker Model 63 PT-8-62 Size 1 / 2 OD Tube 062 Wall Tube Type Compress-Align Material Brass Max Pressure 750 PSI. The Compression line of Parker Brass Products is UL listed for use with flammable liquids. Brass compression fitting for use with copper, aluminum or thermoplastic tubing.

Colder MCD4204 Chrome Plated Brass Tube Fitting Insert Shut Off Panel Mount 1 8 Insert X 1 4 Barb

Colder MCD4204 Chrome Plated Brass Tube Fitting Insert Shut Off Panel Mount 1 8 Insert X 1 4 Barb
Colder MCD4204 Chrome Plated Brass Tube Fitting Insert Shut Off Panel Mount 1 8 Insert X 1 4 Barb

Colder MCD4204 Chrome Plated Brass Tube Fitting Insert Shut Off Panel Mount 1 8 Insert X 1 4 Barb. This fitting is made of chrome-plated brass for durability and corrosion resistance. Chrome-plated brass for durability and corrosion resistance. The company, founded in 1978, is headquartered in St. Operating temperature range from -40 to 180 degrees F. Working pressure of up to 250 psi. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall Products Company manufactures quick-connect couplings, fittings, and connectors for plastic tubing. This straight-through insert has one or more ribs for creating a tight seal and connects tubing in a straight run. They are designed so that hose is easily mounted over the fitting, but is difficult to remove. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Barbed fittings are characterized by the presence of angled barbs that grab and hold on the inner diameter (ID) of a hose. The operating temperatures range from -40 to 180 degrees Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Insert coupler has one or more ribs for creating a tight seal and connects tubing in a straight run. Insert coupler on one end and barbed construction on the other end for connecting tubes with different ends. It is a fitting with an insert coupler on one end and barbed construction on the other, and is used for connecting two tubes on a bulkhead. The Colder panel-mounted insert is made of chrome-plated brass and has insert and barbed connectors. The working pressure for this fitting is up to 250 pounds per square inch (psi).

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 3 8 Tube OD X 1 4 NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 3 8 Tube OD X 1 4 NPT Male Pipe
Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 3 8 Tube OD X 1 4 NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 3 8 Tube OD X 1 4 NPT Male Pipe. 65 degree F to 250 degree F temperature range. Primary uses water, gasoline, oil and vacuum lines. Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the USA and its territories. Three piece construction nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required. Control Devices Brass Ball Check Valve, 1 / 4", NPT Male. Eaton Weatherhead 3600 X 4 Brass CA 360 Fitting, Branch Tee, 1 / 4", NPT Female x NPT Female x NPT Male. Anderson Metals Brass Pipe Fitting, Coupling, 1 / 4", x 1 / 4", Female Pipe. Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1 / 4", x 1 / 4", NPT Male Pipe. Anderson Metals 57001 Brass Hose Fitting, Adapter, 1 / 4", Barb x 1 / 4", NPT Male Pipe. Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 3 / 8", Tube OD x 3 / 8", NPT Male Pipe. Anderson Metals 50064 Brass Compression Tube Fitting, Tee, 3 / 8", x 3 / 8", x 3 / 8", Tube OD. Anderson Metals Brass Pipe Fitting, Barstock Street Tee, 1 / 4", Female Pipe x 1 / 4", Male Pipe x 1 / 4", Female Pipe. Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1 / 4", Tube OD x 1 / 4", NPT Male Pipe. Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1 / 4", Male Pipe x 1 / 4", Female Pipe. Thread size: 7 / 16", 24 and 9 / 16", 24.

Parker Hannifin 393PD 6 6 Poly Tite Chrome Plated Brass Shutoff Type Insert Fitting 3 8 Compression Tube X 3 8 Plug In Stem

Parker Hannifin 393PD 6 6 Poly Tite Chrome Plated Brass Shutoff Type Insert Fitting 3 8 Compression Tube X 3 8 Plug In Stem
Parker Hannifin 393PD 6 6 Poly Tite Chrome Plated Brass Shutoff Type Insert Fitting 3 8 Compression Tube X 3 8 Plug In Stem

Parker Hannifin 393PD 6 6 Poly Tite Chrome Plated Brass Shutoff Type Insert Fitting 3 8 Compression Tube X 3 8 Plug In Stem. Brass sleeve available for soft metal tubing. Designed for Use with thermoplastic tubing. Black acetal copolymer sleeve. Machined in tube support. Poly-tite nuts will rotate around the sleeve as it tightens to prevent twisting and weakening of the plastic tubing. The acetal Copolymer sleeve resists creeping and stress caused from compression. Knurled Nut for ease of hand tightening. The Body, nut and sleeve are furnished pre-assembled, ready for installation. Poly-tite fittings can be assembled and disassembled repeated. Parker's poly-tite fittings are designed to speed any installation. The black acetal Copolymer also resists ultra-violet Ray attack and has excellent dimensional stability.

Dixon 3 16 X 1 8 Brass Male Connector Compression Fitting 68C 0302

Dixon 3 16 X 1 8 Brass Male Connector Compression Fitting 68C 0302
Dixon 3 16 X 1 8 Brass Male Connector Compression Fitting 68C 0302

Dixon 3 16 X 1 8 Brass Male Connector Compression Fitting 68C 0302. Pressure rating given at 73? The thread end of the nut must face out. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not Underwriter's Laboratories listed for flammable liquid; SAE J-512; ASA; reference SAE 060102 BAInstallation: no flaring, or other preparation of tubing necessary to assemble; Slide nut, then sleeve onto tubing. Do not use in connection with drinking. Insert tube into the fitting. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. FWeight (lb), 0.035 Applications: Use with copper, aluminum and thermoplastic tubing. For thermoplastic tubing, see manufacturers recommendation for pressure range. Be sure the tube is bottomed on the fitting shoulder. Temperature ranges are given for use with soft meta Safety not recommended for steel tubing; Not recommended for applications using gaseous media. Supplier: Dixon Material: Brass Thread: Pipe; Straight Thread Size: 1 / 8", 3 / 8", 24 Tube Size: 3 / 16", Hex: 7 / 16", Length: 1.08", Working Pressure: 400 PSITemperature Range: 65?

Anderson Metals 50062 Brass Compression Tube Fitting Union 1 2 X 1 2 Tube OD

Anderson Metals 50062 Brass Compression Tube Fitting Union 1 2 X 1 2 Tube OD
Anderson Metals 50062 Brass Compression Tube Fitting Union 1 2 X 1 2 Tube OD

Anderson Metals 50062 Brass Compression Tube Fitting Union 1 2 X 1 2 Tube OD. Standard fittings use short nuts. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the USA and its territories. Use with copper, brass, aluminum, or plastic tubing. Primary uses water, gasoline, oil and vacuum lines. Three piece construction - nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required. 65 Degree F to 250 degree F temperature range. bulk pack). Anderson Metals Brass Tube Fitting, Connector, 1 / 2", Compression x 1 / 2", Male Pipe. Shark Bite U 702 A Pipe Deburr Tool and Depth Gauge. Shark Bite U 008 LFA 1 / 2-Inch Straight Coupling, Plumbing Fittings for Residential and Commercial Water Applications, Lead-Free. Shark Bite U 248 LFA 90-Degree Lead Free Push-to-Connect Elbow, 1 / 2-Inch. Neiko 10194 A Titanium Step Drill Bit, High Speed Steel 1 / 4", to 1-3 / 8", Total 10 Step Sizes. Distillers Yeast (DADY) (1 lb. Anderson Metals 50062 Brass Compression Tube Fitting, Union, 3 / 8", x 3 / 8", Tube OD. Anderson Metals Brass Compression Tube Fitting, Sleeve, 1 / 2", Tube OD (Pack of 3). Anderson Metals 50064 Brass Compression Tube Fitting, Tee, 3 / 8", x 3 / 8", x 3 / 8", Tube OD. 2 XL UT 08010 203320 Copper Tubing Boxed, 1 / 2", Od X 10'. 1 / 2", Tube outer diameter. 3 / 4", 16 Thread size.

Tompkins 73 10 Compression Fitting Tube Insert 13 16 18 Brass

Tompkins 73 10 Compression Fitting Tube Insert 13 16 18 Brass
Tompkins 73 10 Compression Fitting Tube Insert 13 16 18 Brass

Tompkins 73 10 Compression Fitting Tube Insert 13 16 18 Brass. Tompkins 73-10 Brass Compression Fitting, Tube Insert, 13 / 16-18, Fittings, Tube Insert, Size: 13 / 16-18 Brass Compression Fittings.

Brass Compression Fitting Poly Tube Support Insert Water Air Gas Refrigeration

Brass Compression Fitting Poly Tube Support Insert Water Air Gas Refrigeration
Brass Compression Fitting Poly Tube Support Insert Water Air Gas Refrigeration

Brass Compression Fitting Poly Tube Support Insert Water Air Gas Refrigeration. Brass Compression Fitting Poly Tube Support Insert Water Air Gas Refrigeration.

Legris 0109 08 10 Brass Compression Tube Fitting 90 Degree Elbow 8 Mm Tube OD X 1 8 BSPT Male

Legris 0109 08 10 Brass Compression Tube Fitting 90 Degree Elbow 8 Mm Tube OD X 1 8 BSPT Male
Legris 0109 08 10 Brass Compression Tube Fitting 90 Degree Elbow 8 Mm Tube OD X 1 8 BSPT Male

Legris 0109 08 10 Brass Compression Tube Fitting 90 Degree Elbow 8 Mm Tube OD X 1 8 BSPT Male. Push-to-connect connections do not require tools or sealants. The 90-degree male elbow fitting, or ell, connects a tube to a female threaded connection at a 90-degree angle. Operating temperature range of -40 to 100 degrees C (-40 to 212 degrees F). Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others. The company, founded in 1918, is headquartered in Cleveland, OH. This 90-degree elbow compression is suitable for use in water, oil, natural gas, and steam applications. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. It has a female compression tube fitting with three-piece construction nut, sleeve, and body with attached insert on one end that connects to tubing for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications and male British Standard Pipe Taper (BSPT) threads on the other for connecting to female threaded pipes. The BSPT threads create a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female compression tube fitting on one end and male BSPT threads on the other. This Legris 0109 series 90-degree elbow is a metric brass compression tube fitting. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). The fitting has an operating temperature range of -40 to 100 degrees C (-40 to 212 degrees F). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 90-degree male elbow to connect a tube to a female threaded connection at a 90-degree angle. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear.

CPC Colder PMCD200412 Quick Disconnect Compression Insert Valved 1 4 Tube OD 1 8 Flow Size PP

CPC Colder PMCD200412 Quick Disconnect Compression Insert Valved 1 4 Tube OD 1 8 Flow Size PP
CPC Colder PMCD200412 Quick Disconnect Compression Insert Valved 1 4 Tube OD 1 8 Flow Size PP

CPC Colder PMCD200412 Quick Disconnect Compression Insert Valved 1 4 Tube OD 1 8 Flow Size PP. Max Operating Pressure (PSI), 100. Max Temperature (Degree F), 160. Max Temperature (Degree C), 71. industrial-tube-fittings. Connection Type: Quick-Disconnect x Compression. Fitting Material: Polypropylene.

LASCO 19 5061 Union Compression Fitting With 1 4 Inch And 1 8 Inch OD Tube Nylon

LASCO 19 5061 Union Compression Fitting With 1 4 Inch And 1 8 Inch OD Tube Nylon
LASCO 19 5061 Union Compression Fitting With 1 4 Inch And 1 8 Inch OD Tube Nylon

LASCO 19 5061 Union Compression Fitting With 1 4 Inch And 1 8 Inch OD Tube Nylon. LASCO, Lasso Supply Company Inc. Service, Selection and Support! Larsen Supply Company is 3 rd Generation, Family owned and operated for over 80 years. Use for hot or cold water. Nylon compression fitting with integral sleeve nut. Use on copper, PEX, poly and aluminum tubing. No need to disassemble fitting - just loosen the nut, insert tubing, then tighten. The Preferred Brand! LASCO 19-5061 Union Compression Fitting, 1 / 4-Inch x 1 / 8-Inch Od Tube, Nylon. 1 / 4-inch x 1 / 8-inch od tube union. 1 / 4-inch x 1 / 8-inch od tube union.

Anderson Metals 00069 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 4 Male Pipe

Anderson Metals 00069 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 4 Male Pipe
Anderson Metals 00069 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 4 Male Pipe

Anderson Metals 00069 Brass Compression Tube Fitting 90 Degree Elbow 1 2 Tube OD X 1 4 Male Pipe. Use with copper, brass, aluminum, or plastic tubing. Brass pipe fitting. Anderson Metals compression elbow. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the USA and its territories. Long nuts are available for higher vibration applications. Easy to disassemble no flaring tool required. Three piece construction - nut, sleeve and body with attached insert. 65 to 250 degrees F temperature range. Standard fittings use short nuts. Primary uses water, gasoline, oil and vacuum lines. 1 / 2-inches compression x 1 / 4-inches male pipe connection. 7 / 16", 24 and 11 / 16", 20 thread size.

Parker A Lok 4PC6 B Brass Compression Tube Fitting Port Connector 1 4 Tube OD

Parker A Lok 4PC6 B Brass Compression Tube Fitting Port Connector 1 4 Tube OD
Parker A Lok 4PC6 B Brass Compression Tube Fitting Port Connector 1 4 Tube OD

Parker A Lok 4PC6 B Brass Compression Tube Fitting Port Connector 1 4 Tube OD. Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Port connector for connecting tubing in a straight run. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This is a port connector for connecting tubing in a straight run. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. This fitting is suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It is compatible with stainless steel, copper, rigid and semi-rigid plastic tubing, but is not recommended for soft tubing. The Parker A-Lok 2 PC 2-B compression tube fitting is made of brass and connects to tubing on both ends. Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants. Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. Fitting connects to tubing on both ends.

Parker A Lok 4 TIZ 125 B Brass Compression Tube Fitting Insert 1 4 Tube OD 0 125 Tube ID

Parker A Lok 4 TIZ 125 B Brass Compression Tube Fitting Insert 1 4 Tube OD 0 125 Tube ID
Parker A Lok 4 TIZ 125 B Brass Compression Tube Fitting Insert 1 4 Tube OD 0 125 Tube ID

Parker A Lok 4 TIZ 125 B Brass Compression Tube Fitting Insert 1 4 Tube OD 0 125 Tube ID. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Fitting connects to tubing on both ends. This insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run. Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies. Insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run. This fitting is suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants. The Parker A-Lok 3 TIZ. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. 125-B compression tube fitting is made of brass and connects to tubing on both ends. It is compatible with stainless steel, copper, rigid and semi-rigid plastic tubing, but not recommended for soft tubing. Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel.